VOLVO
BCM-C006464 - Roll Rate Sensor. Algorithm Based Failures. Signal plausibility failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (16)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
Hva betyr feilkoden?
On cars with roll stability control (RSC), the brake control module (BCM) judges the signal from the stability sensor's roll rate sensor to be implausible. The fault most often lies in the sensor's mounting or in the sensor itself, and roll control is blocked until the fault is fixed.
Mulige årsaker
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Make sure the stability sensor is firmly fixed and correctly fitted under the passenger seat, and look for any bend in its bracket
- 3Have a workshop read the sensor status and replace the stability sensor if the fault remains
- 4If the code points to the airbag system, the fault may lie there, so have the workshop check that system too
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptomer du kan merke5
- Yellow warning symbol and message in the display
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Anti-spin function does not work
- Cruise control will not engage
Hva feilen kan påvirke3
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
- Roll control (RSC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.