VOLVO
BCM-C006A17 - Multi-axis Acceleration Sensor. General Electrical Failures. Circuit voltage above threshold
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The voltage to the AYC sensor in the stability system is above the threshold. This can be caused by the supply wire being shorted to supply voltage or by an internal fault in the sensor, and the stability functions are switched off.
Mulige årsaker
- Supply wire shorted to supply voltage
- Internal fault in the AYC sensor
- Internal fault in the stability sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the AYC sensor for chafing and a short to supply voltage
- 3Check that the charging system works, as excessive voltage in the car can cause this fault
- 4Measure the supply voltage with diagnostic equipment and replace the AYC sensor if the wiring and voltage are in order
- 5The braking system is safety critical: do not work on the AYC sensor or braking system yourself; leave this to a workshop
Symptomer du kan merke5
- General warning lamp on
- Anti-spin function does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Hva feilen kan påvirke1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.