VOLVO
BCM-C006A47 - Multi-axis Acceleration Sensor. System Internal Failures. Watchdog / safety µC failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The stability sensor has sent a message to the brake control module that it has an internal fault in its safety function. The stability functions are switched off until the fault is fixed.
Mulige årsaker
- Internal fault in the stability sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Read the stability sensor with diagnostic equipment and replace it if the fault remains
- 3The brake control module is normally not the fault, so it should not be replaced first
- 4The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptomer du kan merke5
- Anti-spin indicator lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Hva feilen kan påvirke1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.