VOLVO
BCM-C006A95 - Multi-axis Acceleration Sensor. Component Failures. Incorrect assembly
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (12)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4204T12, D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) has found that an incorrect variant of stability sensor is fitted in the car. The variants differ depending on whether the car is all-wheel drive or has hill start assist. When the fitted sensor does not match the car's configuration, the stability functions are blocked.
Mulige årsaker
- Wrong variant of stability sensor fitted
- Stability sensor does not match the car's drivetrain or equipment
Hva du kan gjøre
- 1Check which stability sensor is fitted and whether it has recently been replaced
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Have a workshop fit the correct variant of stability sensor and calibrate it afterwards
- 4Until the fault is fixed, take care on uphill and downhill slopes, as the car may start to roll
- 5The braking system is safety critical: do not work on the stability sensor yourself; leave this to a workshop
Symptomer du kan merke5
- Anti-spin indicator lit
- Traction control does not work
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- The car may roll backwards in D on a slope uphill and forwards in R on a slope downhill
Hva feilen kan påvirke1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.