VOLVO
BCM-C006B00 - Stability System Active Too Long. General Failure Information. No sub type information
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (19)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The stability function has been regulating continuously for too long, and the brake control module (BCM) has registered this. The driver may have noticed the anti-spin function switching off for a while and the ABS lamp lighting. The cause most often lies in the steering wheel, the wheel alignment or how the stability sensor is fitted.
Mulige årsaker
- Steering wheel incorrectly fitted
- Incorrect wheel alignment
- Loose or incorrectly fitted stability sensor
- Damaged AYC sensor
- Stability sensor not working
Hva du kan gjøre
- 1Check the front and rear brakes for signs of overheating damage to the calipers, pads and discs, and have a workshop replace any damaged parts
- 2Check that the steering wheel is correctly fitted and that the front axle is correctly set up
- 3Check that the stability sensor is firmly fixed and correctly fitted to the bracket under the passenger seat
- 4Read and note the code, clear it and road test the car to see whether it returns
- 5The braking system is safety critical: do not work on the brakes or stability system yourself; leave this to a workshop
Symptomer du kan merke5
- General warning lamp on
- Anti-spin and stability function do not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
Hva feilen kan påvirke1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.