Hva betyr feilkode BCM-C008216?

Diagnose og feilkodedefinisjon for BCM-C008216 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C008216 - Brake system malfunction indicator. General electrical malfunction. Voltage too low

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

On the XC90, the brake control module (BCM) has registered that the voltage to it is too low. The module needs a stable voltage to work, and at low voltage the ABS and stability functions may be switched off.

Mulige årsaker

Contact resistance in the connections
Battery voltage too low
Fault in the charging system
Open circuit or short to ground in the supply wire
Damaged fuse in the circuit

Hva du kan gjøre

1Check that the battery is charged and that its terminals are tight and clean
2Start the engine and let it idle. Check that the voltage is normal, and if it is too low, check the charging system
3Check the fuses in the brake system supply
4If the fault remains although the voltage is normal, have a workshop check the connector and supply wire to the brake control module
5The braking system is safety critical: do not work on the brake control module or braking system yourself; leave this to a workshop

Symptomer du kan merke4

General warning lamp on
ABS warning lamp on
ABS, traction control and stability function do not work
Anti-skid function does not work

Hva feilen kan påvirke2

ABS, traction control, stability control and brake assistance are blocked
Active yaw control (AYC) is blocked

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.