VOLVO
BCM-C008254 - Brake System Malfunction Indicator. System Programming Failures. Missing calibration
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) has checked the calibration values it stores for the stability sensor and the airbag control module, and the checksum does not match. This often happens when one of these modules has been replaced, and the stability functions are then blocked until the brake control module has been calibrated.
Mulige årsaker
- Internal fault in the brake control module
- Brake control module not calibrated
Hva du kan gjøre
- 1Have a workshop calibrate the brake control module with diagnostic equipment. This is especially needed after replacing the stability sensor or the airbag control module
- 2Road test the car and check that the code no longer appears
- 3If the code status is still permanent after calibration, the stability sensor needs checking, and the workshop replaces it if needed
- 4The braking system is safety critical: do not carry out the calibration or work on the braking system yourself; leave this to a workshop
Symptomer du kan merke5
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
- Traction control does not work
Hva feilen kan påvirke3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.