VOLVO
BCM-C100A41 - Brake Pedal Angle Sensor. System Internal Failures. General checksum failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
On the V60, the brake control module (BCM) has found an internal fault in the form of a checksum error in its own data for the brake pedal angle sensor. The fault lies in the module, and after any replacement the internal sensors must be recalibrated.
Mulige årsaker
- Checksum error in the module's data
Hva du kan gjøre
- 1Clear the codes in the brake control module and check whether the fault returns
- 2If the fault returns, the brake control module needs replacing by a workshop. After a replacement, the workshop must recalibrate the acceleration sensor and the internal sensors
- 3The braking system is safety critical: do not work on the brake control module or its calibration yourself; leave this to a workshop
Symptomer du kan merke4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.