VOLVO
BCM-C100F12 - Brake Pedal Angle Sensor Supply. General Electrical Failures. Circuit short to battery
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
On the V60, the brake control module (BCM) has detected a short to battery voltage in the supply to the brake pedal angle sensor. The sensor needs the correct supply to measure the pedal position, so without it the pedal signal becomes incorrect.
Mulige årsaker
- Brake pedal angle sensor shorted to battery voltage
- Damaged wiring to the brake pedal angle sensor
- Damaged brake pedal angle sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the brake pedal angle sensor, particularly where it could have touched a live supply
- 3Check the angle sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the brake pedal sensor yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptomer du kan merke4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.