VOLVO
BCM-C101167 - Brake Pedal Feel Simulator Cut-off Pressure Sensor. Algorithm Based Failures. Signal incorrect after event
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
On the V60, the brake control module (BCM) has found that the signal from the pressure sensor in the cut-off unit is incorrect after a certain event, for example a brake application. The fault may lie in the wiring, the connector or the sensor itself.
Mulige årsaker
- Damaged wiring to the cut-off unit
- Faulty plug contact at the cut-off unit's pressure sensor
- Damaged pressure sensor in the cut-off unit
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the cut-off unit and in the connector at the pressure sensor
- 3Check the pressure sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the cut-off unit or brake pedal yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Anti-spin function does not work
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.