VOLVO
BCM-C107968 - Indirect Tire Pressure Monitoring System. Algorithm Based Failures. Event information
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The brake control module (BCM) has not been able to complete the calibration of the indirect tyre pressure monitoring during normal driving. The system needs a certain driving pattern to calculate tyre pressure, and the code shows that the calibration is not finished. It is not a physical fault in the module.
Mulige årsaker
- The car has been driven on poor roads
- The car has been driven in a way that is not normal driving, for example with hard manoeuvres
Hva du kan gjøre
- 1Drive the car normally on an even road with good surface for a while so the system has time to calibrate
- 2Check that the tyre pressure is correct and that all tyres are the same type and size
- 3Clear the code and check whether it returns after a few normal drives
- 4If the fault remains, have a workshop check the calibration with diagnostic equipment
- 5The brake system is safety-critical, so do not replace the brake control module for this code; leave the assessment to a workshop
Symptomer du kan merke2
- The tyre pressure monitoring indication is missing or shows a fault
- Yellow warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.