Hva betyr feilkode BCM-C110668?

Diagnose og feilkodedefinisjon for BCM-C110668 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C110668 - Communication between control modules. Algorithm error. Event-controlled information

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The brake control module (BCM) checks that the steering angle is plausible compared with the car's other signals, once the steering angle sensor has been initialised. The check has not passed at a sufficient speed, so the dynamic stability control is switched off. The code is often linked to the steering angle sensor.

Mulige årsaker

The plausibility check of the steering angle has not passed
Fault in the steering angle sensor (SAS), if a code for it is also stored

Hva du kan gjøre

1Read the codes in the brake control module and check whether a code for the steering angle sensor is also stored
2If this code is stored on its own it can be cleared, and the car then road tested
3If a steering angle sensor code is also present, have a workshop diagnose the sensor with diagnostic equipment
4The brake and stability systems are safety-critical, so have a workshop carry out any work on the module

Symptomer du kan merke2

General warning lamp on
Anti-skid function does not work

Hva feilen kan påvirke1

Dynamic stability control (AYC) is disabled

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.