Hva betyr feilkode BCM-C110787?

Diagnose og feilkodedefinisjon for BCM-C110787 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C110787 - Communication between control modules. Bus/message error. Message missing

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The brake control module (BCM) has not received an initialisation from the steering angle sensor (SAS) after start-up, even though the speed has been high enough. The code only applies to cars with DSTC. It often happens when the car has been driven straight ahead for a longer period and the ignition was then switched off without the steering wheel being turned.

Mulige årsaker

The car was driven straight ahead for a longer period after start-up and the ignition was switched off before the steering angle sensor was initialised
Internal fault in the steering angle sensor (SAS)

Hva du kan gjøre

1Ask whether the car was driven straight ahead for a long time without the steering wheel being turned before the ignition was switched off, as this may be the cause
2If not, read the codes in the steering angle sensor and troubleshoot them accordingly
3Turn the steering wheel slightly while the car is running and check whether the fault returns on the next drive
4The brake and stability systems are safety-critical, so have a workshop carry out any work on the module

Symptomer du kan merke2

General warning lamp on
Anti-skid function does not work

Hva feilen kan påvirke1

Dynamic stability control (AYC) is disabled

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.