Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-C110964
    VOLVO

    BCM-C110964 - Vehicle Dynamics Control Switch. Algorithm Based Failures. Signal plausibility failure

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    6 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)

    Vis modeller per årsmodell og motor (7)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5

    Hva betyr feilkoden?

    The brake control module (BCM) has registered that the signal to switch off the DSTC/ESC stability system has been active for too long. The system always starts with stability control switched on and can only be switched off manually with the thumb wheel on the left steering stalk. The fault most often means a control has stuck or communication has been disturbed.

    Mulige årsaker

    • One or more controls on the left steering stalk have stuck in the activated position
    • Interference or brief interruptions on the data network (CAN)
    • Fault in the central electronic module (CEM), which sends the signal

    Hva du kan gjøre

    1. 1Check that the control on the left steering stalk moves freely and is not stuck, and that nothing is pressing on it
    2. 2Check the fuses for the stability system
    3. 3Clear the code and check that it does not return after the control has been tested
    4. 4If the fault remains, have a workshop read the codes in the central electronic module and check the data network with diagnostic equipment
    5. 5The stability and brake systems are safety-critical, so have a workshop carry out any work on the module

    Symptomer du kan merke1

    • No clear symptoms for the driver

    Hva feilen kan påvirke1

    • The DSTC/ESC stability system cannot be switched off during the current drive

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.