Hva betyr feilkode BCM-C111401?

Diagnose og feilkodedefinisjon for BCM-C111401 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C111401 - Inclination sensor. General malfunction information. General electrical malfunction

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The AYC sensor in the stability system contains, among other things, a tilt angle sensor, which sends information about the car's sideways tilt to the brake control module (BCM) over its own internal data network. The code is set when the signal from that sensor is faulty. It only applies to cars with DSTC.

Mulige årsaker

Open circuit or short to ground in the wiring to the AYC sensor
Internal fault in the AYC sensor

Hva du kan gjøre

1Check the wiring to the AYC sensor for open circuits, chafing and short circuits to ground
2If no wiring fault is found, the AYC sensor needs replacing by a workshop
3Clear the code after the repair and road test the car
4The brake and stability systems are safety-critical, so have a workshop carry out all work on the sensor and the module

Symptomer du kan merke4

General warning lamp on
Traction control does not work
Stability function does not work
Anti-skid function does not work

Hva feilen kan påvirke2

Traction control, stability control and dynamic stability control (AYC) are disabled
Roll stability control (RSC) is disabled on cars that have it

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.