Hva betyr feilkode BCM-C111486?

Diagnose og feilkodedefinisjon for BCM-C111486 (Volvo XC90 (2003–), Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C111486 - Inclination sensor. Bus/message error. Invalid signal

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

One of the sensors in the AYC sensor has an incorrect offset value, meaning the correction that compensates for the sensor's own deviation. This most often means the sensor is fitted incorrectly or its bracket is damaged. The code only applies to cars with DSTC.

Mulige årsaker

AYC sensor incorrectly fitted
Loose AYC sensor
Bent bracket for the AYC sensor
Internal fault in the AYC sensor

Hva du kan gjøre

1Check that the AYC sensor is firmly secured and correctly fitted to the bracket under the front passenger seat
2Make sure the bracket is not bent or otherwise damaged
3Correct any faults in the fitting and clear the code
4The brake and stability systems are safety-critical, so have a workshop carry out any work on the sensor and the module

Symptomer du kan merke4

General warning lamp on
Traction control does not work
Stability function does not work
Anti-skid function does not work

Hva feilen kan påvirke2

Traction control, stability control and dynamic stability control (AYC) are disabled
Roll stability control (RSC) is disabled on cars that have it

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.