VOLVO
BCM-P170181 - Reverse Engagement Error. Bus Signal / Message Failures. Invalid serial data received
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (16)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake module gets a message about which gear is selected. With reverse engaged the stability function should not be able to activate, but the code is set when the signal is missing or when reverse is engaged while the car is moving forwards. The code therefore points to faulty gear information from the selector or gearbox, not to a fault in the brake control module.
Mulige årsaker
- Manual gearbox: fault in the central electronic module (CEM)
- Automatic gearbox: fault in the transmission control module (TCM)
Hva du kan gjøre
- 1Establish whether the car has a manual or automatic gearbox and troubleshoot the correct module
- 2Manual gearbox: read and troubleshoot the codes in the central electronic module
- 3Automatic gearbox: read and troubleshoot the codes in the transmission control module
- 4Road test the car and check that the correct gear is shown and that reverse does not give a false signal when driving forwards
- 5The brake system is safety-critical, so have a workshop carry out any work on the modules
Symptomer du kan merke5
- Traction control warning lamp lit
- Brake circuit warning lamp lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
Hva feilen kan påvirke3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.