BCM-U010000 - Lost Communication With Engine control module. General Failure Information. No sub type information
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) cannot make contact with the engine control module (ECM) on the CAN network, or the communication is disturbed. The stability functions and cruise control then cannot receive engine information. The fault most often comes from interference or temporary breaks on the CAN network rather than from an internal fault in the brake control module.
Mulige årsaker
- Interference or intermittent breaks on the CAN network
- Fault in the engine control module (ECM)
Hva du kan gjøre
- 1Read codes in the central electronic module and any other affected modules first, and correct them before this code is cleared
- 2If no codes are stored, check the CAN wiring between the brake control module and the engine control module for breaks and shorts
- 3Check that the wiring is not routed too close to sources of interference, such as mobile phones
- 4Clear this code only once the other codes are corrected, and check that it does not return after a road test
- 5The brake system is safety-critical, so have a workshop carry out any work on the wiring and the modules
Symptomer du kan merke5
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Hva feilen kan påvirke3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.