VOLVO
BCM-U023500 - Lost Communication With Closing Velocity Module. General Failure Information. General electrical failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2008–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) receives no communication from the crash speed module (CVM). The fault may come from interference or intermittent breaks on the CAN network, or from a break or loose contact in the wiring between the BCM and the CVM. The front monitoring function may then not work.
Mulige årsaker
- Interference or intermittent breaks on the CAN network
- Break or loose contact in the wiring between the brake control module and the crash speed module
- Fault in the module that sends the signal
Hva du kan gjøre
- 1Read codes in the central electronic module and other affected modules, and correct them first
- 2If no codes are stored, check the wiring and connectors on the CAN network between the BCM and the crash speed module
- 3Check that the wiring is not routed close to sources of interference, such as mobile phones
- 4Do not replace the brake control module for this code, as the fault does not lie in it
- 5The collision and brake systems are safety-critical, so have a workshop carry out all work on the wiring and the modules
Symptomer du kan merke1
- Front monitoring and active safety do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.