VOLVO
BCM-U030051 - Internal Control Module Software Incompatibility. System Programming Failures. Not programmed
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) is supplied by the manufacturer with special software used at the factory to fill the brake system with hydraulic fluid. After the module is fitted in the car, that software must be overwritten with the correct software. The code is set if this has not been done, and the flashing warning lamps show that the system is not ready.
Mulige årsaker
- Incorrect software has been downloaded to the module, because the supplier's software has not been overwritten
Hva du kan gjøre
- 1Have a workshop read the code and confirm that incorrect software has been downloaded
- 2Reprogram the brake control module with the latest software following the workshop procedure
- 3After programming, check that the warning lamps go out and that the code is not set again
- 4The brake system is safety-critical, so have a workshop carry out all programming and checks of the brake system
Symptomer du kan merke3
- ABS and traction control lamps flashing
- ABS warning lamp shows a fault
- Traction and anti-skid warning lamp shows a fault
Hva feilen kan påvirke2
- Locking-free brakes are disabled, as ABS is blocked
- Electronic brake force distribution is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.