VOLVO
BCM-U030057 - Internal Control Module Software Incompatibility. System Programming Failures. Invalid / Incompatible Software Component
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The module estimates tyre pressure in the wheels mainly from wheel sensor signals. The code is set when one of the software parts in the brake module does not match the others. The indirect tyre pressure monitoring is then switched off.
Mulige årsaker
- Incorrect or damaged software in the brake control module
Hva du kan gjøre
- 1Have a workshop reprogram the brake control module with the latest software following the workshop procedure
- 2After programming, check that the tyre pressure monitoring indication works and that the code is not set again
- 3The code does not indicate a hardware fault, so do not replace the brake control module before reprogramming it
- 4The brake system is safety-critical, so have a workshop carry out all programming and checks
Symptomer du kan merke2
- The tyre pressure monitoring indication shows a fault or no indication
- Yellow warning symbol and text message in the display
Hva feilen kan påvirke1
- Indirect tyre pressure monitoring (iTPMS) is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.