VOLVO
BCM-U040100 - Invalid Data Received from ECM/PCM A. General Failure Information. No sub type information
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (5)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The brake control module (BCM) takes information from the engine control module (ECM) over the CAN network and checks it with an internal function. The code is set when the signal from the engine control module deviates from the expected value. The fault normally lies in the engine management rather than in the brake control module.
Mulige årsaker
- Fault in the engine control module (ECM)
Hva du kan gjøre
- 1Read codes in the engine control module and troubleshoot them first
- 2Check that the engine runs normally and that there are no other codes in the engine management
- 3Do not replace the brake control module for this code, as the fault normally lies in the engine management
- 4The brake system is safety-critical, so have a workshop carry out any work on the engine management signal and the brake control module
Symptomer du kan merke2
- Traction control warning lamp lit
- Traction control does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.