VOLVO
BCM-U040141 - Invalid Data Received From Engine control module. System Internal Failures. General checksum failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) has received data from the engine control module (ECM) with an incorrect checksum, as the signal deviates from the expected value. Adaptive cruise control may then work poorly. The fault indicates that the engine management is the cause.
Mulige årsaker
- Fault in the engine control module (ECM)
Hva du kan gjøre
- 1Read codes in the engine control module and troubleshoot them first
- 2Check that the engine runs normally and that there are no other codes in the engine management
- 3Do not replace the brake control module for this code, as the fault lies in the engine management
- 4The brake system is safety-critical, so have a workshop carry out any work on the engine management signal and the brake control module
Symptomer du kan merke1
- Adaptive cruise control does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.