Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-U040200
    VOLVO

    BCM-U040200 - Invalid Data Received from TCM. General Failure Information. No sub type information

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (5)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5

    Hva betyr feilkoden?

    The brake control module (BCM) receives no information from the transmission control module (TCM) on the CAN network, or the communication is disturbed. The stability functions then cannot get data about the gearbox. The fault most often comes from interference or intermittent breaks on the network rather than from the brake module itself.

    Mulige årsaker

    • Interference or intermittent breaks on the CAN network
    • Fault in the transmission control module (TCM)

    Hva du kan gjøre

    1. 1Read codes in the central electronic module and any other affected modules first, and correct them before this code is cleared
    2. 2If no codes are stored, check the wiring on the CAN network for breaks, chafing and contact resistance
    3. 3Check that the wiring is not routed close to sources of interference, such as mobile phones
    4. 4Clear the code only once the cause has been corrected, and check that it does not return after a road test
    5. 5The brake system is safety-critical, so have a workshop carry out any work on the wiring and the modules

    Symptomer du kan merke3

    • Traction control warning lamp lit
    • Stability function does not work
    • Anti-skid function does not work

    Hva feilen kan påvirke3

    • Stability control is disabled
    • Traction control is disabled
    • Dynamic stability control (AYC) is disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.