VOLVO
BCM-U300041 - Control Module. System Internal Failures. General checksum failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
When the sensors in the airbag system (SRS) are calibrated, a checksum is stored in the brake control module (BCM). At each start-up the module compares the stored checksum with a calculated one. The code is set when the airbag system has been replaced and the checksums do not match, meaning the brake control module is not calibrated.
Mulige årsaker
- The brake control module is not calibrated
Hva du kan gjøre
- 1Calibrate the brake control module following the workshop information for vehicle communication
- 2Read the code status after calibration, with the ignition on and some time having passed
- 3If the code has disappeared, or has changed from permanent to intermittent, the fault has been corrected
- 4The brake system is safety-critical, so have a workshop carry out the calibration and check the function
Symptomer du kan merke5
- Traction and anti-skid warning indication shows a fault
- Stability function does not work
- Front monitoring and active safety do not work
- Adaptive cruise control does not work
- The brake pedal needs more force than normal
Hva feilen kan påvirke2
- Traction control and stability control are disabled
- Dynamic stability control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.