VOLVO
BECM-C105016 - Hydrid/EV Battery Temperature Sensor "F" Circiut Range/Performance. General Electrical Failures. Circuit voltage below threshold
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The BECM has found that the signal from temperature sensor F in the high voltage battery is too low. This is an electrical fault in the sensor circuit. The cause may be in the battery cooling system, in the sensor, or in the wiring between the sensor and the control module.
Mulige årsaker
- Coolant level in the battery cooling loop is too low
- Air in the battery cooling loop
- One of the battery coolant pumps is damaged
- The shut-off valve in the battery cooling is damaged
- The cooling loop is damaged, blocked or leaking
Hva du kan gjøre
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Check that the coolant level in the battery cooling loop is high enough and top up if needed
- 3Look for leaks in the cooling loop, such as damp patches or traces of coolant under the car
- 4Have a workshop check that visible connectors in the cooling system are secure and free from corrosion
- 5Have a workshop with diagnostic equipment check the sensor, the wiring and the cooling
- 6The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke4
- Yellow warning symbol and message in the display
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
- The combustion engine runs more often than normal in HYBRID mode
- Low voltage in the battery or a dead battery
Hva feilen kan påvirke1
- Electric propulsion is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.