VOLVO
BECM-C106400 - Hybrid/EV Battery Pack Coolant Pump "A" Control Performance. General Failure Information. No sub type information
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The BECM checks whether the control signal to battery coolant pump A is reasonable for the pump's operation. The fault is a performance fault: the control signal lies outside the normal range. It may come from the pump itself or from the cooling around it, such as a coolant level that is too low or air in the system.
Mulige årsaker
- Poor contact or oxidation in the connectors
- The battery coolant level is too low
- Air in the battery cooling loop
- Battery coolant pump A is damaged
Hva du kan gjøre
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Make sure the coolant level is high enough and top up if needed
- 3Have a workshop check that the pump connectors are secure and free from corrosion
- 4Have a workshop bleed the cooling loop if there is air in the system
- 5Have a workshop with diagnostic equipment check pump A
- 6The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.