VOLVO
BECM-C106E00 - Battery Charging Crash Detect IMPACT DETECTED. General Failure Information. No sub type information
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The BECM has received a crash event signal from the supplemental restraint system or the central electronic module (CEM). The code means that one of the incoming signals indicates that a collision has taken place. It is a consequential fault of a fault in the control module that sent the signal.
Mulige årsaker
- An impact signal arrives from the supplemental restraint system (SRS)
- An impact signal arrives from the central electronic module (CEM)
- The fault in the supplemental restraint system (SRS) needs to be investigated
- The fault in the central electronic module (CEM) needs to be investigated
Hva du kan gjøre
- 1Start by reading fault codes in the supplemental restraint system (SRS) and the central electronic module (CEM)
- 2Troubleshoot the control module that sent the signal, since the fault lies there
- 3Do not clear this code until the fault in the sending control module has been remedied
- 4Do not work on the airbag system yourself, have a workshop carry out the fault finding
- 5The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke4
- Red warning symbol and message in the display
- Charging of the high voltage battery stops or works poorly, especially while driving
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
- Low voltage in the battery or a dead battery
Hva feilen kan påvirke2
- Electric propulsion is not possible
- The high voltage battery cannot be charged
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.