Hva betyr feilkode BECM-C107100?

Diagnose og feilkodedefinisjon for BECM-C107100 (Volvo V60 (2011–), Volvo V60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BECM-C107100 - Hybrid/EV Battery Pack Charger PSR Supply Voltage Low. General Failure Information. No sub type information

System

Batteristyring (BECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

V60 (2011–)

Vis modeller per årsmodell og motor (2)

Hva betyr feilkoden?

The high voltage battery gets wake-up commands over dedicated cables from the engine control module (ECM) via relays. The code is set when the CPSR signal, which relates to charging, is too low for the battery energy control module (BECM). The fault may be caused by a fault in the central electronic module (CEM) or by poor connections.

Mulige årsaker

Fault-trace the central electronic module (CEM)
Poor contact or oxidation in the connectors

Hva du kan gjøre

1Read the fault codes in the central electronic module (CEM) and remedy any battery related faults first
2Have a workshop check that the connectors in the signal circuit are secure and free from corrosion
3Have a workshop check the CPSR signal cable to the battery energy control module for an open circuit
4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptomer du kan merke4

Red warning symbol and message in the display
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The charging warning comes on or behaves abnormally
Low voltage in the battery or a dead battery

Hva feilen kan påvirke1

Electric propulsion is not possible

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.