Hva betyr feilkode BECM-C107600?

Diagnose og feilkodedefinisjon for BECM-C107600 (Volvo V60 (2011–), Volvo V60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BECM-C107600 - Hybrid/EV Battery External Isolation Resistance Test. General Failure Information. No sub type information

System

Batteristyring (BECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

V60 (2011–)

Vis modeller per årsmodell og motor (2)

Hva betyr feilkoden?

Before a high voltage battery can be put into use, its insulation must be measured, and the BECM must be programmed after an approved measurement. The code is set when an attempt has been made to activate a battery that is not yet approved and has not had new software loaded.

Mulige årsaker

Insulation measurement and related BECM programming have not been done

Hva du kan gjøre

1This code is a workshop task, since the insulation measurement needs diagnostic equipment
2Have a workshop carry out the insulation measurement and the programming of the BECM before the battery is used
3The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptomer du kan merke4

Red warning symbol and message in the display
Charging of the high voltage battery stops or works poorly
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The combustion engine runs more often than normal in HYBRID mode

Hva feilen kan påvirke2

The high voltage battery cannot be charged
Electric propulsion is not possible

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.