VOLVO
BECM-P0AA500 - Hybrid/EV Battery Negative Contactor Circuit Stuck Open. General Failure Information. No sub type information
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The BECM controls and monitors the high voltage battery contactors at the same time and checks that the voltage matches the contact positions. The code is set when there is no voltage in the high voltage circuits even though the negative-side contactor has been commanded closed, which means the contact is stuck open. The fault may be caused by a damaged high voltage battery.
Mulige årsaker
- The high voltage battery is damaged
Hva du kan gjøre
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Check that the car's ordinary battery is charged and in good condition
- 3Have a workshop with diagnostic equipment check the contactors and the high voltage battery
- 4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke4
- Red warning symbol and message in the display
- Charging of the high voltage battery stops or works poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
- The combustion engine runs more often than normal in HYBRID mode
Hva feilen kan påvirke2
- The high voltage battery cannot be charged
- Electric propulsion is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.