VOLVO
BECM-P0B1100 - Hybrid/EV Battery Pack Current Sensor "B" Circuit High. General Failure Information. No sub type information
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The BECM measures the total current in the high voltage battery with two internal current sensors, and one sensor is used to check the other. The code is set when at least one of the sensors gives a faulty value. The fault concerns current sensor B. The signal from it is too high
Mulige årsaker
- The high voltage battery is damaged
Hva du kan gjøre
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Has the car recently been to a workshop or had work done on the high voltage parts?
- 3Have a workshop with diagnostic equipment check the current sensors in the high voltage battery
- 4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.