Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BECM-P0B6A00
    VOLVO

    BECM-P0B6A00 - Hybrid/EV Battery Voltage Sense "J" Circuit Low. General Failure Information. No sub type information

    System

    Batteristyring (BECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    1 modell

    V60 (2011–)

    Vis modeller per årsmodell og motor (2)
    • Volvo V60 (2011–)2013–2014Kun motor: D82PHEV
    • Volvo V60 (2011–)2015Kun motor: D82PHEV, D87PHEV

    Hva betyr feilkoden?

    The BECM monitors the voltage across the battery cells in the high voltage battery. The code is set when the voltage in cell monitoring J is too low. The cause may be incorrect charging, for example from an external cable, with the combustion engine running or through brake energy recovery, or a damaged battery.

    Mulige årsaker

    • Incorrect charging from the external charging cable, where the fault may lie in the on-board charger (OBC)
    • Incorrect charging with the combustion engine running, where the fault may lie in the engine control module (ECM) or the high voltage generator (IGM)
    • Incorrect charging through brake energy recovery, where the fault may lie in the electric rear axle (IEM)
    • The high voltage battery is damaged

    Hva du kan gjøre

    1. 1Read and note the fault code, clear it and road test to check whether it returns
    2. 2Has the car recently been charged from an external cable or driven with heavy brake energy recovery?
    3. 3Have a workshop read the fault codes in the charger, the engine control module, the high voltage generator and the electric rear axle
    4. 4Have a workshop with diagnostic equipment check cell monitoring J in the high voltage battery
    5. 5The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

    Symptomer du kan merke4

    • Red warning symbol and message in the display
    • Charging of the high voltage battery stops or works poorly
    • Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
    • The combustion engine runs more often than normal in HYBRID mode

    Hva feilen kan påvirke2

    • The high voltage battery cannot be charged
    • Electric propulsion is not possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.