Hva betyr feilkode BECM-U000155?

Diagnose og feilkodedefinisjon for BECM-U000155 (Volvo V60 (2011–), Volvo V60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

BECM-U000155 - High Speed CAN Communication Bus. System Programming Failures. Not configured

System

Batteristyring (BECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

V60 (2011–)

Vis modeller per årsmodell og motor (2)

Hva betyr feilkoden?

The control module communicates on HS-CAN using a configuration ID that must match the one sent out by the central electronic module (CEM). The code is set when the ID does not match, which happens if a used control module with other software has been fitted.

Mulige årsaker

Incorrect configuration ID, for example a used control module not intended for this car
Sporadic breaks on one of the CAN wires in the network

Hva du kan gjøre

1Read and note the fault code, clear it and road test to check whether it returns
2Have a workshop check the configuration ID and load the correct software into the control module
3The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

Symptomer du kan merke3

Red warning symbol and message in the display
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The combustion engine runs more often than normal in HYBRID mode

Hva feilen kan påvirke2

The control module stops sending messages on HS-CAN
Electric propulsion is not possible

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.