VOLVO
BECM-U002855 - Vehicle Communication Bus A. System Programming Failures. Not configured
System
Batteristyring (BECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Its own configuration ID is checked against the one used on Sensor-CAN. The code is set when the ID does not match, which can happen if a control module has been replaced without the correct software being loaded.
Mulige årsaker
- Incorrect configuration ID, for example a used control module not intended for this car
- Sporadic breaks on one of the CAN wires in the network
Hva du kan gjøre
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Have a workshop check the configuration ID and load the correct software into the control module
- 3The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The control module stops sending messages on Sensor-CAN
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.