VOLVO
CCM-000A - Air distribution damper motor position sensor Signal too low. Intermittent fault
System
Klimaanlegg (CCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
2 modellerS40 (1996–2004), V40 (1996–2004)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The fault is logged as intermittent, meaning the position sensor for the air distribution damper motor gave too low a signal at an earlier point but is not present now. Because the fault does not stay, it is usually a loose or corroded connector, or a chafed wiring harness, that causes the disturbance.
Mulige årsaker
- Contact resistance or oxidation at the connection
- Open circuit in the supply wire for the position sensor
- Open circuit in the signal wire from the position sensor
- Supply to the position sensor shorted to ground
- Signal wire from the position sensor shorted to ground
- Defective damper motor
Hva du kan gjøre
- 1Clear the fault code and test drive to see whether it returns
- 2Check the connector at the damper motor and at the control module for contact resistance, oxidation and play
- 3Check the wiring for chafing and crushed areas
- 4Use a multimeter to check that the supply and signal wires to the position sensor have no contact with ground (the body). If something is wrong, have a workshop repair the wire
- 5If the wiring is intact but the fault returns, have a workshop replace the damper motor
- 6If you have a diagnostic tool, follow the damper position in live data while turning the control and check that it changes smoothly
Symptomer du kan merke1
- Air flow problem
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.