VOLVO
CCM-0013 - Recirculation damper motor. Signal too high. Permanent fault
System
Klimaanlegg (CCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
Permanent fault: the control module has received too strong a signal from the recirculation damper motor. The fault is present now, and the control module will not allow the damper motor to run while it lasts. The fault code can also be set together with other damper codes, in which case the fault may lie in the network that drives the dampers.
Mulige årsaker
- Signal wire shorted to ground
- Defective damper motor
Hva du kan gjøre
- 1Read off the stored fault codes. If CCM-0013 appears with other damper codes, the network may be at fault
- 2Check the connectors and the wiring to the damper motors for chafing, crushed areas and corrosion
- 3Clear the fault codes and test drive to see whether they return
- 4With the ignition off, use a multimeter to check the signal wire for ground contact (the body). If found, have a workshop repair it
- 5If the fault remains, have a workshop decide whether the damper motor is damaged and replace it if needed
- 6If you have a diagnostic tool, follow the damper position in live data while turning the control and check that it changes smoothly
Symptomer du kan merke1
- Air flow problem
Hva feilen kan påvirke1
- While the fault is present the damper motor is not activated, so recirculation cannot be controlled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.