Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CCM-001F
    VOLVO

    CCM-001F - Air quality sensor. Signal too high

    System

    Klimaanlegg (CCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Hva betyr feilkoden?

    The control module has registered that the air quality sensor signal is faulty and too high. The fault applies to cars with electronic climate control (ECC) and an air quality sensor. While the fault is present the control module does not allow the recirculation flap to close in air quality mode, so that function is unavailable.

    Mulige årsaker

    • Open circuit in the signal wire linking the control module to the air quality sensor
    • Signal wire linking the control module to the air quality sensor shorted to live voltage
    • Defective air quality sensor

    Hva du kan gjøre

    1. 1With the ignition on and the blower running, check that the air quality sensor reading sensor is reasonable
    2. 2Check the connectors at the control module and at the air quality sensor for contact resistance, oxidation and play
    3. 3Check the wiring for chafing and crushed areas
    4. 4Remedy anything found and clear the fault code
    5. 5If the fault remains, have a workshop check the signal wire and replace the sensor if needed
    6. 6If you have a diagnostic tool, follow the sensor value in live data while you affect the sensor and check the value changes

    Symptomer du kan merke1

    • Poor air quality in the cabin

    Hva feilen kan påvirke2

    • While the fault is present the control module does not allow the recirculation flap to close in air quality mode
    • No air quality function

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.