VOLVO
CCM-B102F4A - Auxiliary Switch. System Internal Failures. Incorrect component installed
System
Klimaanlegg (CCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The climate control module (CCM) checks the buttons in the bottom row of the keypad and has found a button that has no entry in the vehicle configuration file. The fault comes from an incorrect vehicle configuration, which is corrected by programming rather than by replacing a working part.
Mulige årsaker
- The vehicle configuration is incorrect
Hva du kan gjøre
- 1Read off and clear the fault code, then check whether it returns
- 2Check that the connectors to the climate panel are firmly seated and free from oxidation
- 3With diagnostic equipment, read the status of the bottom-row buttons and compare them with the buttons fitted to the climate panel
- 4Check that the bottom-row buttons match the equipment fitted to the vehicle, as a button missing from the configuration causes the fault
- 5Have a workshop load updated software into the CEM, then into the climate control module (CCM), as the fault is corrected by programming
- 6After the repair, check that the climate system works and that the fault code does not return
Symptomer du kan merke5
- The lower row of buttons on the climate unit does not work
- Buttons and controls on the centre console for climate work fully or partly incorrectly
- The lane departure warning does not work
- City Safety does not work
- The blind spot system (BLIS) is not working
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.