VOLVO
CCM-B108277 - Right Temperature Damper Motor. Mechanical Failures. Commanded position not reachable
System
Klimaanlegg (CCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The climate control module (CCM) has registered a wrong step count between the two end positions of the right temperature damper motor. The damper therefore does not reach the correct position when controlled. This can be caused by a blocked damper or by the climate system being calibrated at the wrong temperature.
Mulige årsaker
- Blocked damper
- Climate system calibrated at the wrong temperature
- Internal fault in the right temperature damper motor or its control module
Hva du kan gjøre
- 1Check that the damper motor sits correctly in place
- 2Check that the damper is not blocked or stuck, for example by a screw, a cable or a foam rubber gasket
- 3Read and clear the code, then road test the car to see whether it returns
- 4If the fault remains, have a workshop calibrate the climate control module with diagnostic equipment
- 5If the fault returns after calibration, activate the damper motor with a diagnostic tool and check that it moves
Symptomer du kan merke2
- Cabin temperature does not match the setting
- Temperature control or air conditioning does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.