Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-1A5B
    VOLVO

    CEM-1A5B - Communication with the steering wheel module (SWM). Signal missing

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Hva betyr feilkoden?

    The central electronic module (CEM) has lost communication with the steering wheel module (SWM) and sets this code. The fault lies in the communication, not in the CEM, so the CEM should not be replaced. The steering wheel module handles the buttons on the wheel and the cruise control, so several functions operated from the wheel can stop working.

    Mulige årsaker

    • The steering wheel module is not getting power
    • The ground wire to the steering wheel module is broken
    • Contact resistance in the connections
    • Broken CAN wiring to the steering wheel module
    • Wrong steering wheel module for this car, for example a used module with different software or hardware
    • A common CAN network fault if several communication faults are stored at the same time

    Hva du kan gjøre

    1. 1With the ignition on, activate the hazard warning switch. If the hazard lamps start, the CEM has power and ground
    2. 2Test the horn. If it sounds, the steering wheel module is probably powered. If the hazard lamps work but the horn does not, check the horn relay fuse in the engine bay.
    3. 3Check the steering wheel module fuse. If it has blown, replace it once. If it blows again, use a multimeter to check the wire after it has no contact with ground.
    4. 4Check that the connector to the steering wheel module is seated and not corroded or damaged. Use a multimeter to check the ground wire has no break
    5. 5After the work, clear the code and check the horn and the wheel buttons. If the code returns, read the module ID with a diagnostic tool if you have one

    Symptomer du kan merke4

    • Cruise control does not work at all
    • The wipers only run at the lowest speed
    • The turn signals do not work
    • The buttons on the steering wheel do not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.