VOLVO
CEM-1A65 - Communication with the suspension module (SUM). Signal missing
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The central electronic module (CEM) has lost communication with the suspension module (SUM) and sets this code. The fault lies in the communication, not in the CEM, so the CEM should not be replaced. The Four-C system, which controls chassis damping, does not work, and a general warning lamp may light.
Mulige årsaker
- The SUM is not getting power
- Contact resistance in the connections
- Broken CAN bus
- The SUM is defective
- The ground wire to the SUM is broken
- Wrong SUM for this car, for example a used module with different software or hardware
Hva du kan gjøre
- 1Check the SUM fuses. If one has blown, replace it once. If it blows again, use a multimeter to check the wire after it has no contact with ground.
- 2Check that the connectors to the SUM and the wiring mat are seated and not corroded, chafed or damaged, and that the battery connection is clean
- 3Check that the relay for the SUM power supply is seated and clean. If the CEM has fault codes for this relay, trace those first
- 4If you have a diagnostic tool, read the SUM module ID. If it reads, the bus is probably intact and the fault may be intermittent
- 5After the work, clear the code and check that the Four-C function works
Symptomer du kan merke2
- The general warning lamp is lit
- The Four-C function does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.