VOLVO
CEM-1C21 - Relay, infotainment. Signal too high
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The CEM registers that the signal to the coil of the infotainment relay is too high. The usual cause is a short to supply voltage in the relay circuit or a defective relay. The audio system does not work.
Mulige årsaker
- A short to supply voltage in the relay circuit
- A defective relay
Hva du kan gjøre
- 1Check that the fuses for the infotainment relay are intact. If one has blown, replace it once
- 2Replace the infotainment relay with an identical one. If the audio system then works, the old relay was probably defective
- 3With the ignition on, check that the relay clicks when activated. A click shows that the relay works
- 4Use a multimeter to check the wire between the relay and the infotainment module for a short to supply voltage. If the fault remains, check the module with a diagnostic tool
- 5After the work, clear the code and check that the audio system works
Symptomer du kan merke1
- The audio system does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.