VOLVO
CEM-1D03 - Control module not fully programmed. Internal fault. Intermittent fault
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The CEM has at some point registered that the software download was not completed, or that the CEM is not fully programmed or configured. The fault is intermittent, so it may have occurred before without being active now. The engine may then fail to start.
Mulige årsaker
- The software download was not completed
- The CEM is not fully programmed or configured
Hva du kan gjøre
- 1With the ignition on, check whether the code returns when you start the engine again
- 2Check that the battery terminals and cable connections are clean and tight, so the CEM voltage is stable
- 3Have a workshop download the software again and check the configuration with diagnostic equipment
- 4The fault may be intermittent. If it returns, have the workshop assess it case by case
- 5After the work, clear the code and check that the engine starts normally
Symptomer du kan merke1
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.