VOLVO
CEM-1D06 - Control module. Configuration fault
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The CEM has found the wrong parameter count in the car's configuration file. The fault is registered when the CEM starts up again after a reset. The fix is to reprogram the control module with the correct software, which a workshop does.
Mulige årsaker
- A wrong parameter count in the car's configuration file
Hva du kan gjøre
- 1Check that the battery terminals and cable connections are clean and tight, so the voltage does not drop at start-up
- 2With the ignition on, check whether the code returns after switching the ignition off and on again
- 3If you have a diagnostic tool, read the customer parameters and write them down before any software is downloaded
- 4Programming and new software are done by a workshop, since the control module must be reprogrammed
- 5After the work, clear the code and check that it does not return
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.