Hva betyr feilkode CEM-4F43?

Diagnose og feilkodedefinisjon for CEM-4F43 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Bestill reparasjon hos OBD Tuning.

VOLVO

CEM-4F43 - Light emitting diode, left camera module. Signal too high

System

Sentral elektronikk (CEM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

5 modeller

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The CEM monitors communication between the blind spot system (BLIS) LEDs and the camera modules. If the signal from the left LED is too high, the code is set. The LED may then stay on all the time.

Mulige årsaker

The left LED wire has a short to supply voltage

Hva du kan gjøre

1With the ignition on, check that the LED goes out when the system is not active
2With the ignition off, unplug the left LED plug and make sure the LED is undamaged
3Use a multimeter to check that the signal wire to the LED has no short to supply voltage
4After the work, clear the code and check that the LED works

Symptomer du kan merke2

The LED does not come on
The LED is always on

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.