VOLVO
CEM-5F3A - Water pump. Signal too high
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2001, 2005–2009
- Volvo S60 (2001–2009)2002Alle motorer unntatt: D5244T2
- Volvo S60 (2001–2009)2003Alle motorer unntatt: B5244S6, D5244T2
- Volvo S60 (2001–2009)2004Alle motorer unntatt: B5244S6, B5254T4, D5244T2
- Volvo S80 (1999–2006)1999–2002, 2005–2006
- Volvo S80 (1999–2006)2003–2004Alle motorer unntatt: B5254T2
- Volvo V70 (2000–2008)2000–2003, 2005–2008
- Volvo V70 (2000–2008)2004Alle motorer unntatt: B5254T4
- Volvo V70 XC / XC70 (2001–2007)2001–2007
- Volvo XC90 (2003–)2003–2015
Hva betyr feilkoden?
The central electronic module (CEM) monitors the water pump in the parking heater. If the signal in the pump circuit is too high, the code is set. The fault shows when the heater is active, and the heating of the passenger compartment becomes poorer.
Mulige årsaker
- Signal wire short-circuited to voltage supply
- Defective water pump
- Damaged water pump
Hva du kan gjøre
- 1Read and note the code, clear it and activate the heater to see whether the fault returns
- 2Activate the water pump with the heater running and listen for a buzzing sound showing that it runs
- 3Check that the water pump connectors are secure and free from corrosion
- 4Use a multimeter to check that the signal wire to the water pump has no contact with voltage supply
- 5If the wire is intact and the fault remains, a workshop should replace the water pump
Symptomer du kan merke2
- Parking heater does not work
- Poor heating in the passenger compartment
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.