VOLVO
CEM-8A05 - Dipped headlamp relay. Signal too high. Intermittent fault
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The dipped beam relay must be activated for the code to be set. CEM then registers that the dipped beam is short-circuited to battery voltage. The fault is intermittent, so it may have occurred earlier without being active now. The front lamps may then not light as they should.
Mulige årsaker
- The dipped beam relay circuit is short-circuited to voltage
Hva du kan gjøre
- 1Check that the dipped beam relay is correctly fitted and that its contacts are not corroded
- 2Check the connections to the relay for chafing, loose connections and corrosion
- 3Use a multimeter to check that the wires to the relay have no contact with voltage
- 4If the relay is damaged it should be replaced, and then check that the dipped beam works
Symptomer du kan merke1
- Front lamps do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.