Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-8A24
    VOLVO

    CEM-8A24 - Gas discharge lamp module (GDL) left-hand. Faulty signal

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (4)
    • Volvo C30 (2007–2013)2007–2011
    • Volvo C70 (2006–2013)2006–2011
    • Volvo S40 (2004–2013)2004–2007
    • Volvo V50 (2004–2013)2004–2007

    Hva betyr feilkoden?

    Although the code is named faulty signal, the left-hand gas discharge lamp module (GDL) reports an internal fault to the central electronic module (CEM). The fault may lie in the module, in the lamp housing or in the signal wiring between them. Check the lamp and the wiring before the module is replaced.

    Mulige årsaker

    • The left-hand gas discharge lamp module (GDL) is faulty
    • The left-hand lamp housing is faulty
    • Open circuit in the signal wire between the left-hand lamp housing and the gas discharge lamp module
    • The signal wire between the lamp housing and the module is short-circuited to battery voltage
    • The signal wire between the lamp housing and the module is short-circuited to ground

    Hva du kan gjøre

    1. 1Switch on the low beam and see whether the left lamp lights. If it does not, check the bulb first and replace it with a new one of the correct type
    2. 2Switch the ignition off and unplug the connectors to the headlamp. Check that they are not oxidised, loose or damaged
    3. 3Use a multimeter to check that the signal wires between the lamp housing and the module are not broken and have no contact with ground or battery voltage
    4. 4After recent removal or replacement, make sure the igniter sits properly. It works on high voltage, so leave other work to a workshop
    5. 5If the fault remains, have a workshop replace the module. After replacement the car data must be programmed in and the position sensors recalibrated

    Symptomer du kan merke1

    • The low beam does not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.