VOLVO
CEM-8A34 - Gas discharge lamp module (GDL) right-hand. Signal too high
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
Although the code is named too high signal, it means that the right-hand GDL module receives too little supply voltage. A broken signal wire between the CEM and the module can give the same message, so both are checked.
Mulige årsaker
- Supply voltage to the right-hand GDL module is too low
- Open circuit in the signal wire running to the right-hand GDL module
Hva du kan gjøre
- 1With the ignition off, check that the connectors at the right-hand module are clean, firmly fitted and undamaged
- 2Use a multimeter to check that the signal wire between the CEM and the right-hand module is not broken and has no contact with ground
- 3Check that the right-hand module has a good earth connection, meaning the earth connection is tight and clean
- 4With the engine running and the low beam on, use a multimeter to check that the supply voltage is not below normal. The supply is shared with the left-hand module
- 5If the fault remains, have a workshop check the supply and the signal wire
Symptomer du kan merke1
- The low beam does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.